盒子燒寫fastboot成功，但無法打開顯示如下代碼，也無法 ...

返回列表

查看: 15568|回復: 0

盒子燒寫fastboot成功，但無法打開顯示如下代碼，也無法擦...

[復制鏈接]

sunyw

電梯直達

樓主

發表于 2017-4-24 11:42 | 只看該作者回帖獎勵

|倒序?yàn)g覽 |閱讀模式 | 來自江蘇

>>免登錄體驗極速滿血版deepseek -R1 671B大模型

System startup

Reg Version:  v1.1.0
Reg Time:    2014/11/7  9:40:54
Reg Name:    hi3798mdmo1b_hi3798mv100_ddr3_1gbyte_16bitx2_2layers_emmc.reg

Fastboot 3.3.0-svn13200 (huangcm@ubuntu) (Nov 03 2015 - 14:57:04)

Fastboot:    Version 3.3.0
Build Date: Nov  3 2015, 14:57:23
CPU:          Hi3798Mv100
Boot Media: SD
DDR Size:    1GB

Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x70 0x70 0x70 0x70 0x70 0x70 0x70 0x70
No NAND device found!!!

MMC/SD controller initialization.
MMC/SD Card:
MID:       0x88
Read Block:  512 Bytes
Write Block: 512 Bytes
Chip Size: 7393M Bytes (High Capacity)
Name:       "NCard"
Chip Type: SD
Version:    2.0
Speed:    25000000Hz
Bus Width: 4bit
Boot Addr: 0 Bytes

*** Warning - bad CRC or SD, using default environment

Boot Env on SD
Env Offset:       0x00100000
Env Size:          0x00010000
Env Range:          0x00010000

SDK Version: HiSTBAndroidV600R001C00SPC053_v2014121715

HI_Flash_Open partion deviceinfo error
HI_Flash_Open partion misc error
press the key!!

fastboot燒寫, fastboot 燒寫uboot, fastboot 燒寫內核, 小米盒子 fastboot, 盒子 fastboot

上一篇：流媒體技術是啥子雞兒
下一篇：電視機頂盒搖控器電源開關需要對接才能用嗎？