首頁 收藏 QQ群
 網站導航

ZNDS智能電視網 推薦當貝市場

TV應用下載 / 資源分享區

軟件下載 | 游戲 | 討論 | 電視計算器

綜合交流 / 評測 / 活動區

交流區 | 測硬件 | 網站活動 | Z幣中心

新手入門 / 進階 / 社區互助

新手 | 你問我答 | 免費刷機救磚 | ROM固件

1234
返回列表
樓主: MarsKeeper
上一主題 下一主題
[分享]

B760E/B760EA/B860A救磚方法

  [復制鏈接]
31#
發表于 2023-2-23 11:08 | 只看該作者 | 來自河南
回復 支持 反對

舉報

32#
發表于 2023-2-23 11:08 | 只看該作者 | 來自河南
回復 支持 反對

舉報

33#
發表于 2023-7-27 15:50 | 只看該作者 | 來自福建
正需要這樣的  感謝分享
回復 支持 反對

舉報

34#
發表于 2023-9-24 18:51 | 只看該作者 | 來自陜西
在電腦上搭建一個TFTP服務器
2、將recovery鏡像命名為recovery.img,放到TFTP服務器的文件目錄中
這兩步怎么弄?  有刷機包文件嗎
回復 支持 反對

舉報

35#
發表于 2025-2-19 22:25 | 只看該作者 | 來自天津
求助 求助:中興的ZXV10B760E(H) 有WIFI,開機停在 中國移動 界面不動了,跑碼跟蹤 顯示如下內容,最好 定位在 -- System halted  這里,,是不是 磚了????程序不能繼續 運行下去了。

以下是盒子開機后的 跑碼內容。
n
new RSA
format 2
Fformat 2
FLG
F1
NB
TZ
J

U-Boot 2009.08-svn34659 (Apr 24 2015 - 19:07:48) V0020

dram_init to config green led on
PDWNCIOMUX gpio is 73
NXP B.V. - MT85XX SoC with ARM1176JZF-S
DRAM:   1 GB
eMMC:
------------------------------------------------------------
[emmc_initialize] U-Boot MTD eMMC init!
-------------------------------------------------------------
[emsdc_initialize] 8580 At 0x7000b000 config 1 pwr 1
EMMC_MSDC: <CKGEN_AgtEnableClk  > Enable EMSDC dram Clk !
[print_emmcinfo] Device: EMMC_MSDC
[print_emmcinfo] Manufacturer ID: 0x90
[print_emmcinfo] CARD/BGA ID: 0x1
[print_emmcinfo] OEM: 0x14a
[print_emmcinfo] Name: H4G1d
[print_emmcinfo] product SN: 0xa269d4
[print_emmcinfo] Tran Speed: 25000000
[print_emmcinfo] Rd Block Len: 512
[print_emmcinfo] MMC version 4.0
[print_emmcinfo] High Capacity: Yes
[print_emmcinfo] Capacity: 3728 MBytes
[print_emmcinfo] Bus Width: 4-bit
------------------------------------------------------------
[emmc_initialize] Init Done!
------------------------------------------------------------
[start_armboot] eMMC card initialize success !!!
[_i_get_upg_status_in_nand]upg status passed from preloader
Using default environment

In:    serial
Out:   serial
Err:   serial
r_args_to_uboot:
        head sig        : 0xa0b0ead1
        version : 1
        boot type       : 0
        dram ch1        : 0x20000000
        dram ch2        : 0x20000000
        kern addr       : 0x5ea12d32
        initrd addr     : 0x8ec25242
        initrd size     : 0x00000000
enable bim two way write.
boot type:[0]
Bootloader version 7433
is_upg_flag =0
_v_set_boot_args _bootargs_buf =root=/dev/ram0 rw console=ttyMT0 kgdboc=ttyMT0 m              em=1024M mt85xx_reserve=751M,17M drvmem=378M,195M vmalloc=240M vmalloc=240M
_v_set_boot_args bootargs=root=/dev/ram0 rw console=ttyMT0 kgdboc=ttyMT0 mem=102              4M mt85xx_reserve=751M,17M drvmem=378M,195M vmalloc=240M vmalloc=240M
MMC:   [msdc_initialize] 8580 At 0x70009000 config 1 pwr 1
MTK_MSDC: 0
?V????x?糿
get_board_type called
gpio:105 0
gpio:104 0
gpio:103 0
gpio:102 1
gpio:101 0
hw Ver:0x02
Board: BOARD_TYPE_M3_02 Ver:0x02
board_led_init to LED_PIN_POWER_GREEN on
Hit any key to stop autoboot:  0
config partition ethaddr=3C:DA:2A:D6:6C:10
setup_bootenv env_boardtype=2
to get safe kernel
to run cmd =emmc read 0 01efc964 06800000 00000400

MMC read: dev # 0, addr # 6800000, byte count 0 ... 32505864 blocks read: OK
sizeof(struct header) =96
sizeof(bt_img_hdr) =608
header offset =96
imag crc = 0x6f2e
magic=ANDROID!??/
kernel_size =3129276 kernel_addr=0x10008000  ramdisk_size=0x319081 ramdisk_addr=              0x11000000  page_size=2048
read_length =6381664 KernelSize=3129344 InitrdSize=3250176
to run cmd =emmc read 0 2e000000 06800000 00616200

MMC read: dev # 0, addr # 6800000, byte count 0 ... 32505864 blocks read: OK
sum1 = 0x14D1.
sum2 = 0x14D1.
imag crc calcute =0x2eeb
u4_kernel_addr =2e000860 u4_initrd_addr=2e2fc860
r_args_to_uboot.u4_initrd_addr 0x1f:0x8b:0x8:0x0
bootargs=root=/dev/ram0 rw console=ttyMT0 kgdboc=ttyMT0 mem=1024M mt85xx_reserve              =751M,17M drvmem=378M,195M vmalloc=240M vmalloc=240M initrd=0x2e2fc860,0x0031980              0
^^^^^^^^^^^test test^^^^^^^^^^^^^^^^^
bootargs=root=/dev/ram0 rw console=ttyMT0 kgdboc=ttyMT0 mem=1024M mt85xx_reserve              =751M,17M drvmem=378M,195M vmalloc=240M vmalloc=240M initrd=0x2e2fc860,0x0031980              0 safe_kernel=V729036 2016-12-10 boardtype=2 mac=3C:DA:2A:D6:6C:10 boot_revision              =V0020 boot_revision=V0020 quiet
^^^^^^^^^^^end end end^^^^^^^^^^^^^^^^^
do_mt85xx_boot called
_v_do_mt85xx_boot_nand u4_kernel_addr=2e000860
_v_do_mt85xx_boot_nand 111
_v_do_mt85xx_boot_nand 222  boot_cmd=bootm_zImg 0x2e000860

Starting kernel ...

03.797 Uncompressing Linux...


Compressed data violation

-- System halted



回復 支持 反對

舉報

36#
發表于 2025-2-19 23:04 | 只看該作者 | 來自天津
請大佬看看 截圖,還有救嗎??

微信圖片_20250219225851.jpg (499.73 KB, 下載次數: 10)

微信圖片_20250219225851.jpg

微信圖片_20250219225913.jpg (725.98 KB, 下載次數: 14)

微信圖片_20250219225913.jpg

微信圖片_20250219225918.jpg (881.34 KB, 下載次數: 14)

微信圖片_20250219225918.jpg

微信圖片_20250219225922.jpg (500.88 KB, 下載次數: 13)

微信圖片_20250219225922.jpg

微信圖片_20250219225926.jpg (891.71 KB, 下載次數: 12)

微信圖片_20250219225926.jpg

微信截圖_20250219230015.jpg (162.98 KB, 下載次數: 14)

微信截圖_20250219230015.jpg

微信截圖_20250219230054.jpg (234.48 KB, 下載次數: 10)

微信截圖_20250219230054.jpg

微信圖片_20250219230216.jpg (23.81 KB, 下載次數: 12)

微信圖片_20250219230216.jpg
回復 支持 反對

舉報

1234
返回列表

本版積分規則

Archiver|新帖|標簽|軟件|Sitemap|ZNDS智能電視網 ( 蘇ICP備2023012627號 )

網絡信息服務信用承諾書 | 增值電信業務經營許可證:蘇B2-20221768 丨 蘇公網安備 32011402011373號

GMT+8, 2025-3-1 05:20 , Processed in 0.056597 second(s), 9 queries , Redis On.

Powered by Discuz!

監督舉報:report#znds.com (請將#替換為@)

© 2007-2025 ZNDS.Com

快速回復 返回頂部 返回列表