接上TTL線，按住回車按鈕不放，啟動盒子電源開機進入u-boot模式；然后再輸入命令

同款，我的事跑著跑著停了，無法輸入命令，本來想直接安裝第三方軟件來著的

Relocation Offset is: 00000000
Hit any key to stop autoboot:  0
console:/ $ Init wrapper sys mutex successful. Pid:1929
Info: get MI daemon priority before System Init: [-20]
!!!Enter MI daemon prcoess!!
mi_os_PrintCaller[705]: Not implement
MI_SYS_Init() with Parameter
[Utopia][MSOS]: [INFO][MsOS_SHM_Init][1041]     Mappd share memory:
[Utopia][MSOS]: [ERROR][_MsOS_InitEventGroup][3949]    [_MsOS_InitEventGroup][3949] got new shm ptr!
[utopia info] utopia init
[utopia info] open: /application/utopia.conf
[utopia info] don't have utopia.conf
[Utopia][MSOS]: [WARN][MsOS_Init][5758]     Already inited.
open mma dev failed
[Utopia][[MSOS_MMA_query_feature]]: [000655] mma_open fail
[Utopia][MIU]: [MIU INFO] miu open
[Utopia][SYS]: Function = SYSOpen, Line = 1658, [SYS INFO] OPEN INSTANCE...
[Utopia][IPAUTH]: 034309c400d40001
[Utopia][IPAUTH]: [Auth OK]
[Utopia][IPAUTH]: AUTH STATUS:1
>> Start  INJPLAY service
Open MI_OSD kernel module successful

羅什迪 發表于 2024-5-13 15:05
那是不是固件用錯了?。?/blockquote>

固件也是在論壇里下的！跑碼不會跑 固件代碼都沒執行呢！應該不是固件的關系吧

那是不是固件用錯了??？